MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW
MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW

MOREC EV SAE J1772 40A AC charging station, wall-mounted Charging wallbox Max 9.6KW

Sale price$419.99
Sold out
Strom:40A-9.6KW-NAME14-50
  • 【Fast Charging】40A electric vehicle charging station enables high-speed charging and shortens the charging time considerably for all electric vehicles which have Type 1 (SAE J1772 Standard) inlets.
  • 【LCD Indicator & LED Display】Large LCD screen and LED indicator of the EV wallbox help to check the charging status and real-time charging data at a glance, such as actual charging current and voltage, charging temperature and other informative data.
  • 【Type 1 / SAE J1772 Plug】High Performance Terminal: *Using pure copper silver plated material for better conductivity. *Able to automatically filter dust without generating electric sparks.
  • 【Multiple Protection】*Adopt Type A RCD for Leakage Protection. *Can cut off the current within 0.2s when the temperature is too high.*Accurately and effectively monitor the change in the PMW signal, repair the capacitor unit and maintain battery life.*IP66:Effective protection against dust and water.
  • 【Stop/Recharge button】After connecting to the power supply, press the button to start charging, and press the button again to stop charging. No operation for more than 5 minutes, and the charger will be in standby mode (ultra low consumption state)

FAQ

Shipping

Sorry,the unit of temperature cannot be adjusted.

Yes, a neutral is needed,the neutral and two phase connections are featured in the L14-50 plug. With ground too.

Yes, it will.  You will need a 240 volt service installed (same as an electric dryer) to support the Level 2 charging capacity.  Any competent electrician can install this service.

You will receive a copy when you receive your package, if it is missing please contact us

Not directly.   The charger uses the common NEMA 14-50 outlet, while most 30 amp dryer expect a NEMA 14-30 outlet.A conversion NEMA 14-30P to NEMA 14-50R adapter needs to be inserted in between for you.

If you purchase a charger with a switching feature, you will be able to set the current

Yes, but you need to use the J1772 to Tesla adapter that comes with every Tesla.

Yes,It depends on the highest current your battery can withstand. Our charger automatically adjusts the current based on your vehicle's batter