MOREC.us
Morec Ev Sae J1772 Ac Charging Station With NEMA 6-50/14-50 Plug MAX 7.2/9.6KW
- 【Fast Charging】16/32A 40A electric vehicle charging station enables high-speed charging and shortens the charging time considerably for all electric vehicles which have Type 1 (SAE J1772 Standard) inlets.
- 【LCD Indicator & LED Display】Large LCD screen and LED indicator of the EV wallbox help to check the charging status and real-time charging data at a glance, such as actual charging current and voltage, charging temperature and other informative data.
- 【Type 1 / SAE J1772 Plug】High Performance Terminal: *Using pure copper silver plated material for better conductivity. *Able to automatically filter dust without generating electric sparks.
- 【Multiple Protection】*Adopt Type A RCD for Leakage Protection. *Can cut off the current within 0.2s when the temperature is too high.*Accurately and effectively monitor the change in the PMW signal, repair the capacitor unit and maintain battery life.*IP66:Effective protection against dust and water.
- 【Stop/Recharge button】After connecting to the power supply, press the button to start charging, and press the button again to stop charging. No operation for more than 5 minutes, and the charger will be in standby mode (ultra low consumption state)
Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: SAE J1772 standard, suitable for cars made in USA/Canada/Japan
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
Waterproof - IP66
Other brands on the market usually have a waterproof rating of IP55/IP54 while MOREC has chosen better materials to make it dust and water resistant to IP66, it can be used outdoors even in the rain.
Full-link temperature monitoring
The charger is equipped with 8 protection functions, the most prominent of which is the temperature detection function. MOREC charger can monitor the temperature of the entire link between the power plug, cable, case and car end plug, and to cut off the current within 0.2s if the temperature rises above the set value at any point. Once the temperature has dropped, the unit will reapply power.
Superb adaptability
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of SAE J1772 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
LCD DISPLAY
Charging Current
Charging Voltage
Power Consumption
Charging Time
Charging statue
Temperature
Rated Current
Product Specifications
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Shell Material: ABS
Contact Impedance: 0.5m
MaxCable diameter: 15 (mm) / 0.59 (in)
Working Temperature: -30°C ~+ 55°C
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silion rubber
Vibration Resistance: Meet JDQ 53.3 requirements
Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
FAQ
Sorry，the unit of temperature cannot be adjusted.
Yes, a neutral is needed,the neutral and two phase connections are featured in the L14-50 plug. With ground too.
Yes, it will. You will need a 240 volt service installed (same as an electric dryer) to support the Level 2 charging capacity. Any competent electrician can install this service.
You will receive a copy when you receive your package, if it is missing please contact us
Not directly. The charger uses the common NEMA 14-50 outlet, while most 30 amp dryer expect a NEMA 14-30 outlet.A conversion NEMA 14-30P to NEMA 14-50R adapter needs to be inserted in between for you.
If you purchase a charger with a switching feature, you will be able to set the current
Yes, but you need to use the J1772 to Tesla adapter that comes with every Tesla.
Yes,It depends on the highest current your battery can withstand. Our charger automatically adjusts the current based on your vehicle's batter