MOREC
Morec 15A Level 1 EV Portable Charger NEMA5-15 Plug EV Charging Box 100V-120V MAX 3.6KW
- Function
- Portability
- Intelligent Chips
- High Quality
- Warranty
Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: SAE J1772 standard, suitable for cars made in USA/Canada/Japan
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
Full-link temperature monitoring
The charger is equipped with 8 protection functions, the most prominent of which is the temperature detection function. MOREC charger can monitor the temperature of the entire link between the power plug, cable, case and car end plug, and to cut off the current within 0.2s if the temperature rises above the set value at any point. Once the temperature has dropped, the unit will reapply power.
Superb adaptability
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of SAE J1772 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
LCD display
The charger has a small screen that indicates the connection status and charging current.
The charging current bar at the bottom of the screen indicates the charging status, any abnormalities will be indicated by different lights.
Product Specifications
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Shell Material: ABS
Contact Impedance: 0.5m
MaxCable diameter: 15 (mm) / 0.59 (in)
Working Temperature: -30°C ~+ 55°C
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silion rubber
Vibration Resistance: Meet JDQ 53.3 requirements
Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
FAQ
We recommend that you install a circuit breaker device in the circuit to protect the circuit.
You need to have 220 breaker in for this to work
The correct process is to switch the current after connecting the power supply, and then insert the car. After connecting, the current cannot be switched
The charger can be used only by plugging it into the socket. You don't need to install it additionally, just ensure that the socket is grounded and the circuit breaker is greater than 20a
Yes,it works wiht your car
Absolutely, but you should really consider the 40 amp versions because Teslas have larger internal chargers and you will charge that much faster. This charger maxes out at 3.6KW (240v at 16a) and your Tesla charger will step down accordingly.
It depends on your car battery capacity,this 16A charger will be faster than a level 1 charger
Absolutely, but you should really consider the 40 amp versions because Teslas have larger internal chargers and you will charge that much faster. This charger maxes out at 3.6KW (240v at 16a) and your Tesla charger will step down accordingly.