MOREC
Morec Sae J1772 AC Protable Ev Charger Cable With NEMA 6-50/14-50 Plug
- 【Level 1 & Level 2 EV Charger】With the NEMA 14-50/6-50 plug, you can freely charge the car under the wide range voltage of 100-250V. In addition, the current can be switched to 16A, 24A, 32A and 40A.
- 【LCD Display & LED Indicator】With the smart electric vehicle charger's large LCD screen and LED display, we can check the charging status and see real-time data at a glance, such as the actual charging current and voltage, current temperature and other informative data values.
- 【Type 1 / SAE J1772 Plug】High Performance Terminal: *Using pure copper silver plated material for better conductivity. *Able to automatically filter dust without generating electric sparks.
- 【Compatibility】The portable EV charger (16/24/32A/40, 100-250V, 7.2W/8.8KW) can be applied to all electric vehicles which has Type 1 (SAE J1772 Standard) inlet.
- 【Easy to Use】Just insert the plugs on both sides of the EV charger into the car and wall sockets. Convenient to carry, only the NEMA socket is required and you can charge it anywhere.
Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: SAE J1772 standard, suitable for cars made in USA/Canada/Japan
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
Full-link temperature monitoring
The charger is equipped with 8 protection functions, the most prominent of which is the temperature detection function. MOREC charger can monitor the temperature of the entire link between the power plug, cable, case and car end plug, and to cut off the current within 0.2s if the temperature rises above the set value at any point. Once the temperature has dropped, the unit will reapply power.
Superb adaptability
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of SAE J1772 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
LCD DISPALY
Charging current
Charging Voltage
Power consumption
Charging time
Charging status
Operating temperature
Rated current of the device
Charger switchable current
Product Specifications
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Shell Material: ABS
Contact Impedance: 0.5m
MaxCable diameter: 15 (mm) / 0.59 (in)
Working Temperature: -30°C ~+ 55°C
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silion rubber
Vibration Resistance: Meet JDQ 53.3 requirements
Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
FAQ
Shipping
Sorry，the unit of temperature cannot be adjusted.
Yes, a neutral is needed,the neutral and two phase connections are featured in the L14-50 plug. With ground too.
Yes, it will. You will need a 240 volt service installed (same as an electric dryer) to support the Level 2 charging capacity. Any competent electrician can install this service.
You will receive a copy when you receive your package, if it is missing please contact us
Not directly. The charger uses the common NEMA 14-50 outlet, while most 30 amp dryer expect a NEMA 14-30 outlet.A conversion NEMA 14-30P to NEMA 14-50R adapter needs to be inserted in between for you.
If you purchase a charger with a switching feature, you will be able to set the current
Yes, but you need to use the J1772 to Tesla adapter that comes with every Tesla.
Yes,It depends on the highest current your battery can withstand. Our charger automatically adjusts the current based on your vehicle's batter